Search found 693 matches

by magic mike
Sat Nov 17, 2018 12:28 pm
Forum: Load Master forum
Topic: LM Indexing
Replies: 1
Views: 35

Re: LM Indexing

Yep. I have had to grind the lugs on at least two positions on every new style plate I have in order to stop them from binding. The first 6s plate I bought was so bad I finally threw it in the trash. (it's the one in my video about the 6s plates.) You are not alone my friend. You can also bevel the ...
by magic mike
Fri Sep 21, 2018 12:49 pm
Forum: Load Master forum
Topic: Loadmaster press is better it seems
Replies: 3
Views: 397

Re: Loadmaster press is better it seems

I stopped doing the primer mods several months ago Horseman as I just don't have the time to devote to doing them since I brought my annealer to market. I did take the time to put together a guide detailing the entire mod which is available for purchase on my website to anyone who wants it. I do sto...
by magic mike
Mon Aug 20, 2018 11:52 am
Forum: Load Master forum
Topic: Loadmaster press is better it seems
Replies: 3
Views: 397

Re: Loadmaster press is better it seems

My guess is that you're probably right Horseman as concerns the new "normal". For what it's worth, I think that if Lee would harden the indexing rod so that it wouldn't wear as bad along its sides and come up with a more secure, or less fragile way of locking the carrier in position it wou...
by magic mike
Fri Jun 29, 2018 1:03 pm
Forum: Load Master forum
Topic: Indexing issues
Replies: 4
Views: 470

Re: Indexing issues

I have seen this before and the easy fix for it is to preload the press handle to the right and realign the carrier assembly. I agree this is quite a bit of slop but I believe it will run OK if you do the above. :wink:

mike
by magic mike
Sat Apr 21, 2018 11:52 am
Forum: Load Master forum
Topic: New issues with reloading 9mm
Replies: 5
Views: 626

Re: New issues with reloading 9mm

If the primer trough is not contacting the two little bumps on the frame as the ram rises I would suggest that as a fix.

mike
by magic mike
Fri Apr 20, 2018 8:55 pm
Forum: Load Master forum
Topic: New issues with reloading 9mm
Replies: 5
Views: 626

Re: New issues with reloading 9mm

The top cover of the primer trough should be level with the tops of the webs. You will have to apply some pressure (as the shellplate would) to check it. If it was sticking up as high above the web tops as you say yours is I don't see how your press could possibly operate correctly. Something has to...
by magic mike
Thu Apr 19, 2018 12:34 pm
Forum: Load Master forum
Topic: New issues with reloading 9mm
Replies: 5
Views: 626

Re: New issues with reloading 9mm

Check the small half-moon shaped shoulders surrounding the square boss on the carrier that prevent the case ejector plate from rotating. If they are protruding above the face of the shellplate, the nut and case ejector cannot hold the shellplate down against the webs in the carrier and it will rise ...
by magic mike
Fri Apr 13, 2018 10:54 am
Forum: Load Master forum
Topic: Is anybody out there?
Replies: 5
Views: 586

Re: Is anybody out there?

Maybe between all of us on here we got all the problems resolved?

Mike
by magic mike
Sat Jan 27, 2018 1:04 pm
Forum: Load Master forum
Topic: LM Primer Mod Guide
Replies: 2
Views: 955

LM Primer Mod Guide

Hello All, I have not posted on this forum for a long time as I have been very busy in my old age. You know, the usual stuff, fishing, family, hobbies, building a few wooden gear wall clocks, rebuilding my cnc router, learning all new software programs, building a new website, camping, did I mention...
by magic mike
Fri Mar 03, 2017 6:09 pm
Forum: Load Master forum
Topic: Should I try the priming system?
Replies: 6
Views: 2354

Re: Should I try the priming system?

If the lion is peacefully sleeping, I recommend not poking him.

mike
by magic mike
Sun Jan 01, 2017 1:48 pm
Forum: Load Master forum
Topic: Happy New Year, Folks
Replies: 2
Views: 1653

Re: Happy New Year, Folks

Same to you Sir. I got a feeling it's going to be a great year!

mike
by magic mike
Fri Dec 23, 2016 3:01 pm
Forum: Load Master forum
Topic: Yule Tide Greetings from
Replies: 4
Views: 2137

Re: Yule Tide Greetings from

And a Merry Christmas to you and everyone else here in our little community as well Jim. Rain and 75 degrees in Dallas area Christmas day. So much for our ugly Christmas sweater contest______again!

mike
by magic mike
Thu Dec 01, 2016 1:02 pm
Forum: All other Lee Equipment discussion
Topic: 223 in the Lee case collator
Replies: 3
Views: 4545

Re: 223 in the Lee case collator

Good thinking Sir.

mike
by magic mike
Thu Nov 24, 2016 2:09 pm
Forum: Load Master forum
Topic: Happy Thanksgiving
Replies: 1
Views: 1138

Happy Thanksgiving

Happy Thanksgiving Everyone. I hope you all have a wonderful day with family and friends.

Mike
by magic mike
Tue Nov 22, 2016 11:33 am
Forum: Load Master forum
Topic: No oiling hole?
Replies: 2
Views: 1738

Re: No oiling hole?

You can, if you are so inclined, take the ram out of the press and drill and tap a hole for a grease zerk. If you do this, I would recommend that you use a Dremel tool or the like with a 1/8" diameter ball cutter in it and grind a groove around the bore of the press from the hole and back to al...

Go to advanced search