Search found 300 matches

by erle
Mon Aug 07, 2017 8:50 pm
Forum: Load Master forum
Topic: changed carrier today
Replies: 2
Views: 113

Re: changed carrier today

You did good. These LLM's will work but you have to be somewhat mechanical minded to keep them working smoothly. I think a lot of the complaints are from users who have similar problems as yours & they don't know where or how to trouble shoot it. Happy reloading with it for another 24 years! Erle
by erle
Mon Jul 24, 2017 3:41 pm
Forum: Load Master forum
Topic: Small primer slider for older priming system
Replies: 3
Views: 232

Re: Small primer slider for older priming system

Actually, my advice to you would be to go to Mike's Reloading bench and invest in his ARS system. Ordering replacement sliders from him is child's play. Excellent advice! Although I'm not sure Mike offers that service any more. It would be worth your time to check with him & see. If not, it wou...
by erle
Thu May 04, 2017 7:03 pm
Forum: Load Master forum
Topic: Any interest?
Replies: 12
Views: 733

Re: Any interest?

I already have your improvements on both my LLM's and recommend them highly.

Glad to hear that your health is improving!
by erle
Mon Feb 06, 2017 5:01 pm
Forum: Load Master forum
Topic: LM Setup for .243 Winchester...
Replies: 6
Views: 476

Re: LM Setup for .243 Winchester...

I think you will really like taking time to check case length & trim & chamfer each case. I also clean out each primer pocket thoroughly before replacing primer. I then precisely measure each powder load. I am still using an old 2-die C-H full length die set for .243. Began reloading with th...
by erle
Sat Feb 04, 2017 12:58 pm
Forum: Buy, Sell and Trade
Topic: WTB Lee Classic Turret and Load Master
Replies: 5
Views: 511

Re: WTB Lee Classic Turret and Load Master

Mike is a retired engineer who loves to shoot and reload. Being an engineer he has devoted many, many hours to trying to improve the Lee Load Master. He is also a super nice guy and is always willing to share what he has learned and tried with others here on the forum. I understand there are a few r...
by erle
Sun Jan 29, 2017 10:56 am
Forum: Load Master forum
Topic: LM Setup for .243 Winchester...
Replies: 6
Views: 476

Re: LM Setup for .243 Winchester...

I reload a lot of .243 but I do it all on my single stage press, mainly because of case preparation. Maybe 100 rounds a year is all I shoot in .243 so I am not in that much of a hurry when I do reload and I like to check each stage thoroughly on each shell I am going to be shooting at game. Someone ...
by erle
Tue Jan 24, 2017 4:31 pm
Forum: Buy, Sell and Trade
Topic: WTB Lee Classic Turret and Load Master
Replies: 5
Views: 511

Re: WTB Lee Classic Turret and Load Master

If you are mechanical minded and don't mind tinkering, I recommend the LLM. I have two. One I keep set up for .223 only and the other one I use for all calibers of my pistol reloading. I have just about all of Magic Mike's mods on both & recommend them highly. I personally prefer to do all my ot...
by erle
Sun Jan 22, 2017 7:29 pm
Forum: Load Master forum
Topic: pro auto disk in station 2 on Loadmaster?
Replies: 7
Views: 594

Re: pro auto disk in station 2 on Loadmaster?

I hurriedly made one out of a small bolt for the RCBS, but it never worked consistently. I later switched to the Hornady powder cop die. It is about half price & comes ready for the .223 cases. The Hornady works differently in that it is a visible guide & does not lock up the press like the ...
by erle
Wed Jan 18, 2017 11:03 pm
Forum: Load Master forum
Topic: pro auto disk in station 2 on Loadmaster?
Replies: 7
Views: 594

Re: pro auto disk in station 2 on Loadmaster?

I have two LLM's so one is set up for .223 only, distributing powder in station 2 & yes, powder check die in station 3. I had to adapt it with smaller punch.

I use my other LLM for all pistol calibers with normal set-up, priming in station 2 & dropping powder in station 3.

Erle
by erle
Tue Jan 17, 2017 4:22 pm
Forum: Load Master forum
Topic: pro auto disk in station 2 on Loadmaster?
Replies: 7
Views: 594

Re: pro auto disk in station 2 on Loadmaster?

YES to both questions.

I turned the eye bolt around to the other side of the press & removed the explosion shield.

Erle
by erle
Mon Jan 16, 2017 3:16 pm
Forum: Load Master forum
Topic: pro auto disk in station 2 on Loadmaster?
Replies: 7
Views: 594

Re: pro auto disk in station 2 on Loadmaster?

Yes, I have dropped power in station 2 before while reloading .223. To be safe, I removed the priming pin. That lets me use my powder-check die in station 3. I do a lot of case preparation on .223 cases anyway & its not much more trouble to just go ahead & prime before I begin on the LLM. Ne...
by erle
Tue Jan 03, 2017 10:32 am
Forum: Odds and Ends
Topic: Recording load data
Replies: 1
Views: 234

Re: Recording load data

I have looked at several but found that they asked you to record so many things that I did not necessarily want or need to keep a record of. I just made my own sheets using Excel & made only the columns I wanted, since I use it to record reloading only. Ended up printing them on 3 3/4" x 6 ...
by erle
Tue Jan 03, 2017 10:13 am
Forum: Load Master forum
Topic: New Lee Auto Drum for Christmas
Replies: 3
Views: 434

Re: New Lee Auto Drum for Christmas

I'm with Websterz all the way.

I have two & properly installed & properly adjusted, they do a good job for the money.

Erle
by erle
Thu Dec 01, 2016 11:49 pm
Forum: Load Master forum
Topic: LLM parts.
Replies: 6
Views: 662

Re: LLM parts.

websterz wrote:How are your parts doing BTW?


Each & every one is working great. I had problems off & on with the case feeder until you came up with some good improvements.

Erle
by erle
Wed Nov 30, 2016 10:32 pm
Forum: Load Master forum
Topic: triangular folding primer tray
Replies: 5
Views: 673

Re: triangular folding primer tray

I have had difficulties with small primers & the new trays also, especially with the "stop" working properly. I still have some of the round trays & will use them as long as I can. Lee had a good idea & was really trying to improve the situation but did not perfect it before it...

Go to advanced search