Search found 144 matches

by rrgramps
Sun Jun 01, 2014 8:30 am
Forum: Load Master forum
Topic: Powder Drop Measurement Problems
Replies: 22
Views: 6546

Beam AND Electronic

Me too NL. I mean backing up the E scales by cross checking with beam scales. Same with calipers. I recently added a dial caliper, and am using it equally. No batteries either. But the analog tools are still a treat for me to use. Now for an aluminum charge bar. http://castboolits.gunloads.com/showt...
by rrgramps
Sat May 31, 2014 12:21 pm
Forum: Load Master forum
Topic: Powder Drop Measurement Problems
Replies: 22
Views: 6546

The adjustable charge bar does not like small charges of less than .5 on most all powders. I use only ball powders and can not get a constant charge in the 4gr to 4.6gr range. Use the disks that came with the measurer and you'll be fine ++++ on what 2H said. If you ever need real small charges unde...
by rrgramps
Fri May 30, 2014 11:43 am
Forum: Load Master forum
Topic: Loadmaster Quality
Replies: 46
Views: 9293

Re: Cut out the BS.

We are on a Loadmaster forum and I'm trying to respect that. and I'm going to continue. There are mostly helpful folks here who try to help or are looking for help. It would be quite childish and rude of me to rant any more than I already have, for which I am ashamed that I even did. It's not in me...
by rrgramps
Thu May 29, 2014 9:02 pm
Forum: Load Master forum
Topic: Loadmaster Quality
Replies: 46
Views: 9293

CL

Just so you can hear yourself back. May 1, 2014. dillon lies, lee does not lie that bad. May 1, 2014. yea, a real dumb ass designed 550 case feed. Press without case feed is great for a beginner and someone who needs just a lil'ammo. On Apr 30, 2014. No , i mean faggot dillon engineer, LMAO On Apr 3...
by rrgramps
Thu May 29, 2014 4:55 pm
Forum: Load Master forum
Topic: Loadmaster Quality
Replies: 46
Views: 9293

Cut out the BS.

Please cut out the Red vs Blue crap and redundant mm plugs. It is what it is. Drop it please! No more unhelpful BS either. ------------- The 550 is still my favorite machine no matter what you say. By far. Quit trying to badger me into saying it isn't. I belittled the 550 as much as I could without ...
by rrgramps
Thu May 29, 2014 1:47 pm
Forum: Load Master forum
Topic: Loadmaster Quality
Replies: 46
Views: 9293

erle, are you running without the stab plate?
by rrgramps
Thu May 29, 2014 12:41 pm
Forum: Load Master forum
Topic: Loadmaster Quality
Replies: 46
Views: 9293

I almost feel responsible for this "dust-up". Both of you have said that Dillon reloaders aren't perfect, and that it applies to all reloaders. What's to disagree on? They are what they are, tools, nothing more. Yes I know we are talking past each other. I have dissed my Dillon press as m...
by rrgramps
Thu May 29, 2014 11:56 am
Forum: Load Master forum
Topic: Loadmaster Quality
Replies: 46
Views: 9293

FYI

Image
by rrgramps
Thu May 29, 2014 9:55 am
Forum: Load Master forum
Topic: Loadmaster Quality
Replies: 46
Views: 9293

As for the quality of the LLM; IMO a demanding challenge to overcome. Best one-liner yet. As for priming, on or off the press, I prefer priming OFF the press, even on my 650, it's just what I like to do. I understand and I forgive you for it. Heheh. Pay now or pay later. I do both BTW, and have som...
by rrgramps
Thu May 29, 2014 7:51 am
Forum: Load Master forum
Topic: Loadmaster Quality
Replies: 46
Views: 9293

2 Horse, after thinking about it, Lee did make a change to their small primer system last year. I hear it was a big improvement. Then, this year they began doing better with their Turrets. Their turrets were leaving the factory without much quality control with a lot of threads cut crooked. I had 4...
by rrgramps
Wed May 28, 2014 11:05 pm
Forum: Load Master forum
Topic: Loadmaster Quality
Replies: 46
Views: 9293

CL

I knew you'd enjoy reading that. :lol: so are you Gunoil on cast boolits?
by rrgramps
Wed May 28, 2014 10:17 pm
Forum: Load Master forum
Topic: Loadmaster Quality
Replies: 46
Views: 9293

Well that was fifteen years ago. And yes, I had plenty of things to weed out. It was an eBay basket case. It had many missing parts that costed more to rebuild than a new LM. I had broken chains and a few primer hiccups. But eventually I got it running. Today though, I've had more troubles than Job ...
by rrgramps
Wed May 28, 2014 5:04 pm
Forum: Load Master forum
Topic: Loadmaster Quality
Replies: 46
Views: 9293

Re: Loadmaster Quality

Just loaded 500 40's, 500 357Sig's and 1000 5.56 without any problems at all. No priming issues or COAL problems. The only mod I've done is the turret plate, holds oal to within .003 on any caliber that I've loaded so far. Did I just get a fluke or are all the NEW machines like this now? When I get...
by rrgramps
Wed May 28, 2014 12:41 pm
Forum: Load Master forum
Topic: Loadmaster Quality
Replies: 46
Views: 9293

magic mike wrote:Take a .223 case, smash the neck end flat in a vise and then trim as necessary to fit the primer pocket size of your choice. Works great and it's free!

mike

Nice tip. It would work as good as the Lee or sized screwdriver tip. AND it's free! :D :D :D
by rrgramps
Wed May 28, 2014 12:35 pm
Forum: Load Master forum
Topic: Loadmaster Quality
Replies: 46
Views: 9293

Chamfer

I want to chamfer AND CONDITION the pockets to ease and guide the priming punch. Tumblers won't do that. LOL I'm starting to get more anal. During the late 1980s through the 1990s, my brass was sent to the case cleaner after two times shooting. Somehow, I got by with running the smudgy cases through...

Go to advanced search