Search found 40 matches

by Frodo9mm
Sat Mar 04, 2017 11:10 am
Forum: Load Master forum
Topic: My Load Master Frankenstein
Replies: 16
Views: 4627

Re: My Load Master Frankenstein

That is a very nice job and thank you for posting this. I program with Arduino as well and like the mods you've done. Nice.
by Frodo9mm
Sun Feb 05, 2017 9:50 am
Forum: Load Master forum
Topic: LM Setup for .243 Winchester...
Replies: 6
Views: 2075

Re: LM Setup for .243 Winchester...

Erle - You know, after thinking about it, I am just going to go with a single press, like you. I think by the time I buy the turret, dies, shell plate,primer system and auto powder charger, it would be more economy to scale. The Lee Precision 90045 - Breech Lock Reloader Press lists for about $35 to...
by Frodo9mm
Sun Jan 29, 2017 10:54 pm
Forum: Load Master forum
Topic: LM Setup for .243 Winchester...
Replies: 6
Views: 2075

Re: LM Setup for .243 Winchester...

Ok, thank you for the info. I reload 9mm now on the LLM and am weighing single stage verus progressive. I will need a case trimmer in either case. Reloading for 2 people is why I am thinking of going progressive. When we shoot, we shoot a lot of rounds.
by Frodo9mm
Sun Jan 29, 2017 8:56 am
Forum: Load Master forum
Topic: LM Setup for .243 Winchester...
Replies: 6
Views: 2075

LM Setup for .243 Winchester...

Has anyone setup a LM for Winchester 243? My son and I are shooting 243 more and I do not see a stock LM on Lee's website in this configuration. I do see one sold on ebay with dies and I do not see any reason I cannot do so. I would purchase a shell plate, turret and 4 die set, just like I do for my...
by Frodo9mm
Tue Dec 13, 2016 9:41 pm
Forum: Load Master forum
Topic: LM Setup Procedure when switching bullet sizes? (9mm)
Replies: 8
Views: 5020

Re: LM Setup Procedure when switching bullet sizes? (9mm)

Just a followup - Either the FCD was never setup correctly, or it did not matter as much with the 115 gr bullets. It was way adjustment. In any event I used the standard setup and that fixed the issue. I only reload 9mm and usually stay with a particular load for while, so this has been a great lear...
by Frodo9mm
Sun Dec 11, 2016 1:04 pm
Forum: Load Master forum
Topic: LM Setup Procedure when switching bullet sizes? (9mm)
Replies: 8
Views: 5020

Re: LM Setup Procedure when switching bullet sizes? (9mm)

Jim - Thx for the help with all this and I've gathered a lot of valuable info about both my 9mm Pistols and the MAX Col. Please see the info below. Springfield 3.8 XDM-C 9mm - Berries Copper Plate 147 -> 1.2050 MAX COL S&W M&P Shield 9mm - Berries Copper Plate 147 -> 1.2315 MAX COL The Ogee ...
by Frodo9mm
Fri Dec 09, 2016 9:30 pm
Forum: Load Master forum
Topic: LM Setup Procedure when switching bullet sizes? (9mm)
Replies: 8
Views: 5020

Re: LM Setup Procedure when switching bullet sizes? (9mm)

You bring up several good points and I will look at each. The COL is 1.10 recipe calls for. Most cartridges spin free and it is only a few that stick. I will have to see why and if it is b/c the COL on those is too long and hitting the lands. Also, I will have to go back through the setup on the FCD...
by Frodo9mm
Fri Dec 09, 2016 7:02 pm
Forum: Load Master forum
Topic: LM Setup Procedure when switching bullet sizes? (9mm)
Replies: 8
Views: 5020

Re: LM Setup Procedure when switching bullet sizes? (9mm)

Ok, thx Jim.

I am using a full length sizing die, but a some rounds are not passing the plunk test.

I think I need to possibly adjust my sizing die, but I have not had to do that much since I set it up a whil eback.
by Frodo9mm
Fri Dec 09, 2016 6:36 pm
Forum: Load Master forum
Topic: LM Setup Procedure when switching bullet sizes? (9mm)
Replies: 8
Views: 5020

LM Setup Procedure when switching bullet sizes? (9mm)

What is the best way to setup the LM when switching bullet sizes?

I am seeing unacceptable case bulge.

I just went from 9mm 115 Berries Copper to 147 Berries Copper.

I will attach a picture.

Thank you,
Frodo

9mmCaseBugle - Copy.jpg
9mmCaseBugle - Copy.jpg (70.99 KiB) Viewed 5020 times
by Frodo9mm
Wed May 14, 2014 10:51 pm
Forum: Load Master forum
Topic: Only CCI or REMINGTON brand primers are safe to use
Replies: 52
Views: 13136

This was a good write-up that helped me: http://www.tannersbrass.com/primer-failure.aspx I've reloaded and shot over 1000 rounds to date, checking every 10th and making sure each are within "IIRC. the SAAMI spec. for seating depth at -0.004" or -0.005". I no longer have and FTF like I...
by Frodo9mm
Mon May 12, 2014 10:45 pm
Forum: Load Master forum
Topic: Only CCI or REMINGTON brand primers are safe to use
Replies: 52
Views: 13136

Thx for the input. That is a reflection. All that being said, I need to complete all the MM mods for the primer system. I have done ShellPlate and aligned it as MM recommends, but there are several other things I can do.
by Frodo9mm
Mon May 12, 2014 9:01 am
Forum: Load Master forum
Topic: Only CCI or REMINGTON brand primers are safe to use
Replies: 52
Views: 13136

Thx and that makes good sense.
by Frodo9mm
Sun May 11, 2014 10:39 pm
Forum: Load Master forum
Topic: Only CCI or REMINGTON brand primers are safe to use
Replies: 52
Views: 13136

Ok, it's stupid question time: I just pruchased some TulAmmo Small pistol primers and am setting them up to run some 9MM loads. The one of the RIGHT is a test case with the primer only and has a mark on it as if the primer depth is too deep. Do you agree? http://i933.photobucket.com/albums/ad171/fle...
by Frodo9mm
Sat May 10, 2014 9:11 pm
Forum: Load Master forum
Topic: Custom billet LM turrets
Replies: 12
Views: 4158

MM - That is an outstanding job. I am interested in one, possibly 2 so that I can set one up for 9mm and the other up for 45.
by Frodo9mm
Fri May 09, 2014 10:20 am
Forum: Buy, Sell and Trade
Topic: Locate the Powder You Need .... Location Service....
Replies: 3
Views: 2910

In the last week, here's an example of the powder we've located for folks: Bullseye Red Dot TAC TITEGROUP Unique Power Pistol Accurate No. 5 Accurate No. 7 AR Comp CFE 223 Competition H335 IMR 4350 IMR 4895 imr4350 N150 N320 Reloader 15 Varget Winchester 748 We continue to add more location and noti...

Go to advanced search