Search found 16 matches

by JohnMcD348
Sun Nov 15, 2009 12:07 pm
Forum: Load Master forum
Topic: Perfect Powder Measure Auto Disk and graphite powder?
Replies: 7
Views: 2496

You can get it at the big box stores also. Look around where they cut keys in the lock section. I also wonder if you couldn't just rub a #2 pencil or something like that on the surfaces to give you enough graphite lube to do the job initially.
by JohnMcD348
Sun Nov 15, 2009 12:03 pm
Forum: Load Master forum
Topic: LM won't feed last few primers
Replies: 11
Views: 2731

I do that same thing. Use a small piece of wire that will fit down the trough and push the last couple-three primers down.
by JohnMcD348
Sun Nov 15, 2009 6:44 am
Forum: Odds and Ends
Topic: What's wrong with this picture?
Replies: 2
Views: 1440

I haven't seen that episode yet. It looks to me like the guy was just practicing other possible shooting positions. Not that they're the best most plausible positions to use but you never know if you may find yourself in a position that doesn't allow you to comfortably hold and aim properly. Just go...
by JohnMcD348
Sun Nov 15, 2009 6:38 am
Forum: Odds and Ends
Topic: Does anyone else love this show?
Replies: 5
Views: 1928

The old lady was his Grandmother. I kinda wonder if he's really just that bad of a shot or if it was intentional. I'm still on the fence a little about the show. One episode he took some kids out to familiarize them with firearms and I thought it wasn't bad. Other times, watching him interact with s...
by JohnMcD348
Thu May 15, 2008 8:32 am
Forum: Load Master forum
Topic: Where can I get Spare parts
Replies: 3
Views: 1930

OK Thanks. I'll give them a call.
by JohnMcD348
Sat May 10, 2008 10:54 am
Forum: Load Master forum
Topic: Where can I get Spare parts
Replies: 3
Views: 1930

Where can I get Spare parts

I bought my LoadMaster back around August07 and have used it to load alot of .45ACP. I recently bought the shell plates and additional die holders for my other calibers that I load. While looking I discovered that I didn't get teh small primer parts to be able to load .30, .380, etc. Should I just g...
by JohnMcD348
Sat May 10, 2008 10:45 am
Forum: Video discussion and questions
Topic: YOU GUYS ARE GOOD AND BAD!
Replies: 7
Views: 6170

Well, you could always get rid of one to make room and help justify the need.... :lol:
by JohnMcD348
Wed May 07, 2008 10:01 am
Forum: Load Master forum
Topic: Mounting bolt pattern
Replies: 13
Views: 5815

When I mounted mine, I used a piece of 1x6 and grooved a section in the front to allow the ram to pass. I then mounted the 1x6 to the bench using pointed lag bolts so I could just screw them straight into the bench. I predrilled undersized holes in the bench to allow the bolts to pass without splitt...
by JohnMcD348
Wed May 07, 2008 9:54 am
Forum: Load Master forum
Topic: Auto Disk pull back chain keeps slipping out ?
Replies: 8
Views: 3347

Maybe your chain is too small

I posted a similar fix where I bought and used a #36 pull chain I purchased from Lowe's. You said you used a #6. I only had to very slightly open the holes in the arm to allow it to fit. I'm talking 1000/th's of an inch to let the #36 chain pass through. I don't really know what the difference is be...
by JohnMcD348
Fri Apr 18, 2008 2:28 pm
Forum: Load Master forum
Topic: Replacement pieces
Replies: 4
Views: 1990

I just had to trim up my primer slider last night. It wasn't letting the unit slide, the button was chewing it up. It even oblonged the hole on the feeder so now I have a bit of an oval instead of a circle. As for the Chain, I just posted a fix I did that cost about $4 from Lowes and about 3 minutes...
by JohnMcD348
Fri Apr 18, 2008 1:24 pm
Forum: Load Master forum
Topic: Chain Repair, Simple Mod
Replies: 0
Views: 1519

Chain Repair, Simple Mod

I'm sure alot of you out there have broken the chain at least once on your LoadMaster. I broke mine just setting it up the first time. I went to Lowes and bought a new chain setup and learned that it was JUST A BIT LARGER THAN ORIGINAL. Just click on the images to see them larger. 30 seconds with a ...
by JohnMcD348
Wed Mar 19, 2008 9:02 pm
Forum: Load Master forum
Topic: Which powder measures do the LMs come with?
Replies: 3
Views: 2007

I bought mine from Midway back in August and it came with the unit that has the round hopper on it. I have seen the other unit that has the square hopper. I'm not sure which one is which though.
by JohnMcD348
Wed Mar 19, 2008 8:59 pm
Forum: Load Master forum
Topic: The Unofficial Load Master Instruction Manual is online
Replies: 3
Views: 8472

Looks good

Much better than what comes with it from the factory.


It's been a little whiel since I've been on. Great work.
by JohnMcD348
Wed Mar 19, 2008 8:47 pm
Forum: Load Master forum
Topic: New setup video
Replies: 4
Views: 2061

I was actually working on something along those lines awhile back but haven't had the time to really put it all together. I had downloaded the videos to help me set it all up and get it running THANKS GUYS and I started thinking about trying to make a DVD out of all the different videos to helpme le...
by JohnMcD348
Fri Feb 15, 2008 5:50 am
Forum: Video discussion and questions
Topic: setup of the powder measure
Replies: 1
Views: 3098

setup of the powder measure

How about a uick video on setup of the Auto disk Powder measure. When I first setup my Loadmaster, it took a little while to get the disk setup properly so it would actually dispense the powder. I had it so that the lever arm was moving the disk by pushing on the inner circle of the disk and not con...

Go to advanced search