Search found 22 matches

by R1200R
Sun Mar 05, 2017 7:15 am
Forum: Load Master forum
Topic: Should I try the priming system?
Replies: 6
Views: 2281

Re: Should I try the priming system?

I use mixed brass and I've loaded thousands of rounds on my LM, I've had NO priming issues at all. My priming system works flawlessly, I must be living right. I get the occasional upside down case in a feed tube but that's easily rectified. Every couple thousand rounds indexing will get harder, I lo...
by R1200R
Wed Mar 01, 2017 8:36 pm
Forum: Load Master forum
Topic: Flaring and bullet seating depth problems
Replies: 6
Views: 2490

Re: Flaring and bullet seating depth problems

It seems if the cartridges ok single run Id look at my technique, are you running full stroke of the handle? Are all cartridges consistant at the 1.080"?
by R1200R
Wed Mar 02, 2016 5:42 am
Forum: Odds and Ends
Topic: New MRB Case Annealer
Replies: 7
Views: 4863

Very nice, any video of it in action?
by R1200R
Wed Feb 17, 2016 6:08 am
Forum: Odds and Ends
Topic: gas checks
Replies: 3
Views: 2004

where you having issues with your cast bullets that you thought you needed gas checks?
by R1200R
Sun Feb 14, 2016 4:13 pm
Forum: Load Master forum
Topic: Thinking about getting a Loadmaster. Need some help.
Replies: 7
Views: 3029

There's no reason you cannot switch to all steps on the LM, will speed things up considerably. I will tumble clean all brass on return from the range then,fill the case feeder, decap/size, prime, charge, seat, crimp. I can process 300 rounds per hour if I'm into it. I will take new to me brass and s...
by R1200R
Sun Feb 14, 2016 9:08 am
Forum: Odds and Ends
Topic: Does anybody
Replies: 3
Views: 2877

I often go the the powder manufacturer's website for load data. Easy yes, accurate yes. I've compared my Lyman manual to the manufacturer's on line load data and find them with 10ths of a grain or so most times. I find it exceptionally convenient, where else would you be able to get the most up to d...
by R1200R
Sun Feb 14, 2016 8:33 am
Forum: Load Master forum
Topic: Primer Preference
Replies: 7
Views: 2488

I use CCI and Remington exclusively. They have the reputation of quality and they work.
by R1200R
Sun Dec 13, 2015 7:48 pm
Forum: Load Master forum
Topic: Which shell plate for .380 acp?
Replies: 12
Views: 4394

I dont have 380 dies but Ive got some range pickups in my stash. I just ran 5 through my 9mm dies with a 19s shell plate and they lined up pretty well and sat flush on the shell plate. Maybe othrrs who reload 380 will weigh in here. Won't work out. I forgot to change from 19s to 4s when setting up ...
by R1200R
Sun Dec 13, 2015 7:18 pm
Forum: Load Master forum
Topic: Which shell plate for .380 acp?
Replies: 12
Views: 4394

I dont have 380 dies but Ive got some range pickups in my stash. I just ran 5 through my 9mm dies with a 19s shell plate and they lined up pretty well and sat flush on the shell plate.
Maybe othrrs who reload 380 will weigh in here.
by R1200R
Sun Dec 13, 2015 6:54 pm
Forum: Load Master forum
Topic: Which shell plate for .380 acp?
Replies: 12
Views: 4394

What manufacture brass are you using?
by R1200R
Sun Dec 13, 2015 6:34 pm
Forum: Load Master forum
Topic: Which shell plate for .380 acp?
Replies: 12
Views: 4394

My loadmaster manual has shell plate 4S a
s being the correct one.
by R1200R
Fri Dec 11, 2015 7:43 am
Forum: Load Master forum
Topic: 600 rounds per hour
Replies: 15
Views: 5318

Reloading 9mm I can easily make 400 rph. I get the occasional upside-down casing and I'm all thumbs with 115gr bullets. I could push things faster, but thats more ammo than i shoot in a weekend so why bother.
by R1200R
Thu Dec 10, 2015 5:12 am
Forum: Load Master forum
Topic: COL. inconsistent
Replies: 33
Views: 9367

I've struggled with this myself. This excerpt is from Titan Reloadings website in their FAQ section; Seating Depth Variations There are a number of possible causes for overall length variation. One is the way it is measured. If you measure overall length from the tip of the bullet to the base of the...
by R1200R
Wed Dec 09, 2015 5:55 am
Forum: Load Master forum
Topic: Small Rifle Case feeder adjustments
Replies: 6
Views: 3184

I believe you would need the "Pro-Case Feeder Rifle" to get a consistent feed.

http://leeprecision.com/pro-case-feeder-rifle.html
by R1200R
Mon Dec 07, 2015 8:13 pm
Forum: Load Master forum
Topic: Watch and be amazed.............
Replies: 3
Views: 2163

It is a thing of beauty thank you for posting. I wish I had an ounce of that kind of talent and patience.

Go to advanced search