Search found 56 matches

by gooffeyguy
Thu Jul 27, 2017 4:34 pm
Forum: Pro 1000 discussion
Topic: Possible timing issue with Lee Pro 1000?
Replies: 1
Views: 280

Re: Possible timing issue with Lee Pro 1000?

Yes, adjust the indexing.... Pro 1000 Index Problem If the Pro-1000 doesn't index correctly there are three common problems. The first correction to try is resetting the zero adjust screw. This is behind a semi-circular cutout along the bottom edge of the shell plate carrier. Always turn the zero ad...
by gooffeyguy
Thu Jul 13, 2017 3:33 pm
Forum: Load Master forum
Topic: IMPORTANT ANNOUNCEMENT ABOUT PHOTOS
Replies: 3
Views: 352

Re: IMPORTANT ANNOUNCEMENT ABOUT PHOTOS

I've always just used the web space that comes with my Charter internet package for my home. I'll upload pics to it and just insert the web link in the img tags. Smugmug is $48/year but don't know how much space you get. Tinypic is hit or miss. Sometimes they work and sometimes they don't Thumbsnap ...
by gooffeyguy
Mon Jul 03, 2017 7:58 pm
Forum: Load Master forum
Topic: Case feeder difference
Replies: 2
Views: 281

Re: Case feeder difference

As far as I know, yes that's the only difference. That small aluminum tube can be removed by disassembling the base of the case feeder via the 1 screw in the middle. There is a spring also if I remember correctly, but after it's apart in the 2 halves (top/bottom), flip the bottom over and tap the tu...
by gooffeyguy
Thu Jun 29, 2017 1:36 pm
Forum: Load Master forum
Topic: New Loadmaster first observations
Replies: 4
Views: 414

Re: New Loadmaster first observations

I have 2 LM's and both came with a spare flipper and I believe the 2 screws for the blast shield (mine didn't come with blast shields, just the mounting screws). All of my flippers are different colors (grey, red, and white) but are the same. As for turret storage, a few places make metal brackets t...
by gooffeyguy
Sat Jun 24, 2017 4:22 pm
Forum: Buy, Sell and Trade
Topic: LLM + accessories
Replies: 4
Views: 486

Re: LLM + accessories

If I already didn't have 2 with all that (except all the different shell plates, I only have 3) I would!!

That's a great deal
by gooffeyguy
Mon Jun 12, 2017 3:52 pm
Forum: Load Master forum
Topic: Problems with squib loads after going over to loadmaster in 38 HBWC
Replies: 4
Views: 445

Re: Problems with squib loads after going over to loadmaster in 38 HBWC

Thank you for Your reply! So you use the powdermeasure With the return spring instead and have had no troubles... This is similar to the experiences I have had on the classic cast press. Actually the only thing stopping me from doing this on the LM so far is the fear of double charges since this is...
by gooffeyguy
Thu Jun 08, 2017 4:40 pm
Forum: Load Master forum
Topic: Problems with squib loads after going over to loadmaster in 38 HBWC
Replies: 4
Views: 445

Re: Problems with squib loads after going over to loadmaster in 38 HBWC

I've never had a problem with squib loads on any of my LM's or Pro1000's. I don't use the chain on the powder measures though, just the springs. I haven't heard any problems like this when using the chain though, but maybe someone else will know what's going on. Sorry, that probably doesn't help you...
by gooffeyguy
Fri May 12, 2017 11:52 pm
Forum: Load Master forum
Topic: Any interest?
Replies: 12
Views: 1114

Re: Any interest?

I'd be interested in two tip-stops I have a dozen on hand ready to ship. I prefer PayPal, as a gift, so they don't take a bite. My address is websterz@cableone.net. If you prefer pushing the old fashioned way PM me for my mailing address. Two tip stops are $20 shipped. Cool, PayPal sent. I'll PM yo...
by gooffeyguy
Thu May 04, 2017 11:29 am
Forum: Load Master forum
Topic: Any interest?
Replies: 12
Views: 1114

Re: Any interest?

I'd be interested in two tip-stops
by gooffeyguy
Thu Feb 16, 2017 12:53 pm
Forum: Load Master forum
Topic: My Load Master Frankenstein
Replies: 16
Views: 1362

Re: My Load Master Frankenstein

Cool!

I would just set up the measure to not use the reset chain. Very easy to do on that Auto Drum measure.

I don't know how comfortable I would feel about having the powder and priming on the same station though!
by gooffeyguy
Thu Feb 02, 2017 11:31 am
Forum: Load Master forum
Topic: Pro Disk Powder system vs Auto Drum Powder system
Replies: 12
Views: 1290

Re: Pro Disk Powder system vs Auto Drum Powder system

Very happy for all you fellas that are having such good results from the Auto Drum measure. I've not been so lucky with the one I bought. The Pro disk measures I have and have had over the years have all been excellent as far as consistency, even using the double disk kit. The AD not so much, very ...
by gooffeyguy
Thu Jan 19, 2017 3:25 pm
Forum: Load Master forum
Topic: LLM CASE FEEDER SHUT OFF
Replies: 4
Views: 635

Re: LLM CASE FEEDER SHUT OFF

Thanks everyone for some good ideas, I got to looking at mine and I found a piece of brass about the exact size of a quarter. I drilled a hole the same size as the threaded rod out to the edge . then I added a 7/16 " nut to drop it down to the bottom of aluminum collar , so it can pivot back &...
by gooffeyguy
Sun Dec 04, 2016 3:34 pm
Forum: Load Master forum
Topic: Using the Lee Bullet Feeder
Replies: 5
Views: 1528

Re: Using the Lee Bullet Feeder

I've found it works best when flat tipped type bullets are used as opposed to round nose, especially in smaller calibers. I've had problems sometimes using 9mm round nose, when the fingers take the bullet away and the next one is dropped into position, it tips slightly due to the weight of the bulle...
by gooffeyguy
Sun Dec 04, 2016 3:27 pm
Forum: Load Master forum
Topic: Decapping die alternative?
Replies: 2
Views: 549

Re: Decapping die alternative?

You could always use a caliber specific resizing/decapping die like what comes in most die sets. The resizing part of it will make the case centered correctly to be decapped. Also, the collet holding the decapping pin may be too tight. When the pin hits an obstruction or the inside of the case and n...
by gooffeyguy
Sun Dec 04, 2016 3:19 pm
Forum: Load Master forum
Topic: Flipper getting stuck
Replies: 3
Views: 690

Re: Flipper getting stuck

Is the carrier indexed correctly? When the ram is halfway on the way up and the side of the flipper is next to the area on the frame that pulls it out on the way down, how tight is the clearance between the frame and flipper? I've found it needs to just barely be touching or even have the slightest ...

Go to advanced search