New from South MS

If you are registering for this forum, post a message here or send an email to load-master@comcast.net and tell me a bit about yourself. I am mainly interested in your interests or experience in firearms and reloading. I just want to filter out people that want to use this forum to spam other members. Thank you.

Moderator: darwin

Blademaker
Posts: 93
Joined: Mon Jul 08, 2013 5:56 am

New from South MS

Postby Blademaker » Thu Jul 11, 2013 1:58 am

New here, been reading everything I can on Lee's stuff. Got to say it can be a little finicky at times, but well worth a little patience. I'd say 99% of the stuff on my bench is Lee. Only dies not Lee is one they didn't make at the time.

Been using a Pro1000 and Classic cast turret press for years. Finally got a LM and wondered what took me so long. This is my first foray with a autodisk powder measure and I've got to say it's a very nice addition for loading pistol ammo. I'll be adding one to my Pro1000 for another caliber.

Any way, glad I found this site, tons of good info here. Reloading equipment doesn't have to super expensive to make excellent ammo.

User avatar
darwin
Site Admin
Posts: 1954
Joined: Mon Jan 28, 2008 8:11 am
Location: Central Indiana

Postby darwin » Mon Jul 15, 2013 11:10 pm

Welcome aboard. Sorry it took so long for me to reply. I haven't checked the forum for a few days. I didn't realize it had been so long.
Last edited by darwin on Tue Jul 16, 2013 8:56 am, edited 1 time in total.

Blademaker
Posts: 93
Joined: Mon Jul 08, 2013 5:56 am

Postby Blademaker » Tue Jul 16, 2013 12:06 am

No worries, while I don't know what I'd do without the net now days, I don't spend all day on it either.

Will

Sparky45
Posts: 986
Joined: Sun Feb 28, 2010 11:12 pm

Postby Sparky45 » Tue Jul 16, 2013 10:36 am

Welcome. You're going to find this site a great asset in any matter concerning Lee systems (presses and dies). Enjoy.
Sparky45

Blademaker
Posts: 93
Joined: Mon Jul 08, 2013 5:56 am

Postby Blademaker » Tue Jul 16, 2013 4:20 pm

Thanks, been doing a lot of reading through here and there's a ton of good information. Knock on wood I haven't had any trouble with the new LM yet though.

carload9
Posts: 2025
Joined: Fri Oct 26, 2012 9:52 am

Blade

Postby carload9 » Fri Aug 30, 2013 1:01 pm

Where is ya blademaker, its september rite here. Report for duty.[/u]

Blademaker
Posts: 93
Joined: Mon Jul 08, 2013 5:56 am

Postby Blademaker » Fri Aug 30, 2013 2:11 pm

Here, ready for duty. Or more specifically cutting a bunch of firewood rite now.

Only trouble with the LM is I'm running out of empty brass. And don't even get me started on having to keep casting to feed it. Luckily I'm stocked up on powder and primer though.

carload9
Posts: 2025
Joined: Fri Oct 26, 2012 9:52 am

bullets cheap

Postby carload9 » Fri Aug 30, 2013 2:41 pm

how bout 1000 cast favorite for around 55$ unsized/unlubed?


http://www.twoalphabullets.com/ call john. Tell him u know mike in NC.

Also i have 38 spe for sale. same price.[/u]

Blademaker
Posts: 93
Joined: Mon Jul 08, 2013 5:56 am

Postby Blademaker » Fri Aug 30, 2013 4:32 pm

Not too shabby, but I've got gang moulds and cast my own.

Old 454
Posts: 164
Joined: Thu May 10, 2012 7:22 pm

Postby Old 454 » Fri Aug 30, 2013 4:59 pm

Gang mold?? .... hmmm have you seen a Doctor latly :shock:

Blademaker
Posts: 93
Joined: Mon Jul 08, 2013 5:56 am

Postby Blademaker » Fri Aug 30, 2013 6:18 pm

You mean lead levels? Nope, drank straight out of the lead based paint bucket as a kid.

Lead levels are normal from my last check up.


Return to “Read this if you are registering for membership”

Who is online

Users browsing this forum: No registered users and 5 guests