Page 1 of 1

problem/ intermiten

Posted: Sun Dec 30, 2012 12:46 am
by carload9
I'll load 50 or more, then this starts again. Primer cup catches.
Image
primer cup catches on bottom of shell holder.

Posted: Sun Dec 30, 2012 11:45 am
by myloadm61
Have also had that happen. Check to see if some powder or residue is in the primer cup/arm. Usdually that's what I find. Also check that the pin isn't loose.

wierd

Posted: Tue Jan 01, 2013 5:50 pm
by carload9
I taped this pop-cycle stick up and now it works. Wierd! But this is what it looked like would fix it till!
Image

Re: wierd

Posted: Tue Jan 01, 2013 5:56 pm
by carload9
carload9 wrote:I taped this pop-cycle stick up and now it works. Wierd! But this what it looked like would fix it till!
Image

VIDEO BELOW
http://i1113.photobucket.com/albums/k51 ... 586C0E.mp4
I been to three county fairs and i aint never seen nothin to beat it. Who cares, i love this press. The mirror works, the ejector works great from ebay, mrbulletfeeder.biz is incredible. And now a pop-cycle stick. iam just sayin.





xds,sig938,db9,naa22magnum----🎈🎊🎐🎉

Posted: Tue Jan 01, 2013 7:23 pm
by dons
Never could get the bullet ejector to work for very long on my turret. I tried the spring instead and it would get stuck in the turret plate. Finall took it off.

ejector

Posted: Tue Jan 01, 2013 7:57 pm
by carload9
I keep where it rides clean with oil then wiped down. The spring one works fine, it you ever had it working multiple days you should have put one drop of loctite on it. So then the allen screw would not move, which it does! I too had problems til i figured the loctite solution. I now have the hard metal one on. Maybe you should try again with loctite.

My spring threads would start working their way out. I love the dang thing. Ive been having trouble with primer swevel arm, but made a home remedy for that to. I load 45&40s&w on LLM and 9 & 380 on lee CTP.

VIDEO BELOW

http://i1113.photobucket.com/albums/k51 ... DDE7D0.mp4
Image

Posted: Tue Jan 01, 2013 10:32 pm
by Horseman
Don't remember where I saw it but (someone) drilled and tapped the press right in front of the primer arm and inserted an allen head screw. Does the same thing as your "popsicle" stick but didn't look near as umm, ahhh, good. :D

Posted: Tue Jan 01, 2013 11:30 pm
by Sparky45
A dab or two of hot melt glue or even some JB Weld right under where the primer arm hits might help.

yea

Posted: Tue Jan 01, 2013 11:46 pm
by carload9
yea, i was tryin to figure out why it starts and stops, then starts it up again. Maybe the horizontal attach pin in the channel, just dont know. Gonna call andy this week. Sure is running good and powder good too, i was scale weighing rounds tonite, excellent for lil' square ( lee factory second ) powder hopper for 22$ plus shipping. Thanks for the glob trick idea! Still running like a champ.

Posted: Sat Jan 12, 2013 4:45 pm
by The only sarge
When mine does that I clean it with a shot of brake cleaner and it is good to go.

Posted: Fri Jan 25, 2013 9:45 am
by WyrTwister
As said by others , clean the priming system . Also check to see if the tiny pin the primer " rocker " pivots on is bent .

If it is , order 2 , 1 for a spare .

God bless
wyr

Posted: Fri Jan 25, 2013 12:40 pm
by Horseman
WyrTwister wrote:As said by others , clean the priming system . Also check to see if the tiny pin the primer " rocker " pivots on is bent .

If it is , order 2 , 1 for a spare .

God bless
wyr


Well I'll be, Wyr I didn't know that pin was replaceable....I've never had cause to consider it, but that is good to know..

primer

Posted: Fri Jan 25, 2013 1:30 pm
by carload9
nothing bent. I can understand while it works a while then trouble again. Pop-cycle stick working great. might try the golb of glue.

Posted: Sat Jan 26, 2013 10:53 am
by prs
I had a similar problem when my CT press was new. That pin WireTwister mentioned was not folly pressed into the rocker. Goog ever since, and its been years.

prs

Posted: Tue Jan 29, 2013 3:03 pm
by Horseman
You know the only thing I can think of for this issue, and I have seen it mentioned before, is where the "pin" the primer arm rides on is located in the top piece of the ram...I have no idea why they would differ press to press, but I just went and checked mine and at NO time during the up and down operation of the ram, does the top of the primer cup come closer than 1/8 of an inch to the bottom of the shellholder...interesting...maybe a guy could "deepen" the part of the primer rocker that rides on the "pin"..