65mm / 2 1/2 inch 12 gauge

Discussion, question, answers and tips regarding Lee LoadAllshotshell presses

Moderator: darwin

just plain Phil
Posts: 2
Joined: Sat Oct 17, 2009 6:35 am

65mm / 2 1/2 inch 12 gauge

Postby just plain Phil » Fri Dec 18, 2009 7:49 pm

Does anyone have any advice on reloading for a 12gauge that is chambered for a 65mm round ??

User avatar
Jumping Frog
Posts: 625
Joined: Tue Feb 12, 2008 11:17 pm
Location: Texas!

Re: 65mm / 2 1/2 inch 12 gauge

Postby Jumping Frog » Fri Dec 18, 2009 9:02 pm

just plain Phil wrote:Does anyone have any advice . . .

Yeah, although I'd love to be of help, this isn't your run of the mill question for a fairly low traffic forum.

I'd suggest you post the question over at http://www.thehighroad.org/forumdisplay.php?f=15 or at http://www.thefiringline.com/forums/for ... ay.php?f=9.

The High Road handloading forum has 79 people online and The Firing Line handloading forum has 80 people online right this minute as I post these links.

Get very descriptive in your message title so it will get attention from people, like you did here.

Good luck.

Return to “ Lee Load-All II shotshell press”

Who is online

Users browsing this forum: No registered users and 1 guest