WTB Pool Ball

This forum is for people to buy, sell and trade RELOADING supplies and equipment only.

Moderator: darwin

User avatar
darwin
Site Admin
Posts: 1955
Joined: Mon Jan 28, 2008 8:11 am
Location: Central Indiana

Postby darwin » Sat Apr 19, 2014 6:27 pm

I cut some grooves the the handle before I expoxied the billiard ball onto it, to give the glued more bite.

myloadm61
Posts: 953
Joined: Tue Dec 28, 2010 10:59 pm
Location: Montana

Postby myloadm61 » Sat Apr 19, 2014 6:35 pm

I ground a cutting edge on each edge so it will cut better, took a little bit of time to grind it, but was worth it to have the correct taper or very close to it.

myloadm61
Posts: 953
Joined: Tue Dec 28, 2010 10:59 pm
Location: Montana

Postby myloadm61 » Sat Apr 19, 2014 6:39 pm

cl9, are you talking about swaging the primer pockets? If so, I use the rcbs press mount swager and have had excellent results with it. Once in awhile a pocket will still have a "ring" around so it gets deburred. I like to swage better than deburr as no material is removed from the pp.

websterz
Posts: 129
Joined: Wed Apr 02, 2014 9:03 am

Postby websterz » Sat Apr 19, 2014 7:37 pm

myloadm61 wrote:cl9, are you talking about swaging the primer pockets? If so, I use the rcbs press mount swager and have had excellent results with it. Once in awhile a pocket will still have a "ring" around so it gets deburred. I like to swage better than deburr as no material is removed from the pp.

I hate when material gets removed from my pp. Happened once about 45 years ago and I never fully recovered psychologically.

carload9
Posts: 2025
Joined: Fri Oct 26, 2012 9:52 am

no ml

Postby carload9 » Sat Apr 19, 2014 7:38 pm

no my l

case swageing

lee & rcbs make kits. Been doing it year 1/2.


Return to “Buy, Sell and Trade”

Who is online

Users browsing this forum: No registered users and 2 guests