loadmastervideos.com :: View topic - 65mm / 2 1/2 inch 12 gauge

loadmastervideos.com
Discussion of videos and Load Master presses

FAQ

Memberlist

Usergroups

Profile

65mm / 2 1/2 inch 12 gauge

loadmastervideos.com Forum Index -> Lee Load-All II shotshell press

View previous topic :: View next topic

Author

Message

just plain Phil

Joined: 17 Oct 2009
Posts: 2

Posted: Fri Dec 18, 2009 6:49 pm Post subject: 65mm / 2 1/2 inch 12 gauge

Does anyone have any advice on reloading for a 12gauge that is chambered for a 65mm round ??

Jumping Frog

Joined: 12 Feb 2008
Posts: 483
Location: Central Ohio

Posted: Fri Dec 18, 2009 8:02 pm Post subject: Re: 65mm / 2 1/2 inch 12 gauge

just plain Phil wrote:

Does anyone have any advice . . .

Yeah, although I'd love to be of help, this isn't your run of the mill question for a fairly low traffic forum.

I'd suggest you post the question over at http://www.thehighroad.org/forumdisplay.php?f=15 or at http://www.thefiringline.com/forums/forumdisplay.php?f=9.

The High Road handloading forum has 79 people online and The Firing Line handloading forum has 80 people online right this minute as I post these links.

Get very descriptive in your message title so it will get attention from people, like you did here.

Good luck.

Display posts from previous:

	loadmastervideos.com Forum Index -> Lee Load-All II shotshell press	All times are GMT - 5 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Protected by Anti-Spam ACP