Loadmaster Shellplate for 38Super comp case

Questions and discussions and troubleshooting Lee Load Master presses

Moderator: darwin

38super
Posts: 2
Joined: Wed Aug 21, 2019 3:58 pm
Location: NZ

Loadmaster Shellplate for 38Super comp case

Postby 38super » Tue Aug 27, 2019 4:19 pm

Hi, new to the forum but returning to a Lee Loadmaster after some 20 years away!

I brought the press to load .45ACP but would also look to use it from time to time to load
.38SC for my open gun. There seems to be differing opinions as to which shellplate.

Some say #4S while others suggest #19S. Is there anyone on the forum actually loading the
38SC round and can give me a definitive answer? They are not easy to find down here so it's
not possible to walk into a store and try one.
Thanks in advance for your help.

Horseman
Posts: 425
Joined: Sun Jan 18, 2009 4:50 pm

Re: Loadmaster Shellplate for 38Super comp case

Postby Horseman » Fri Aug 30, 2019 6:12 pm

I've been a member a loooong time here. There always seems to be a lot of "users" perusing the site but few members post anymore. Don't know why. I invite you over to another Lee site called Lee Loaders, a friendly and pretty active site that is pretty much dedicated to Lee equipment, although many there also use other vendors as well. A lot of good folks with a plethora of information on all things Lee. See ya' there.

38super
Posts: 2
Joined: Wed Aug 21, 2019 3:58 pm
Location: NZ

Re: Loadmaster Shellplate for 38Super comp case

Postby 38super » Fri Aug 30, 2019 8:01 pm

Thanks. I'll come over & have a look.
Maybe someone there can answer the question.


Return to “Load Master forum”

Who is online

Users browsing this forum: No registered users and 10 guests